Arc reactor installation complete

The photo above shows the robot's arc reactor which, as of April 1st, 2014 has been fully installed. This upgrade will provide enough electrical output to fuel the robot's tremendous power requirements. Currently I'm using a small sample of palladium to catalyst the fission reaction in the arc reactor, however it seems that the reactor is accumulating excessive quantities of neutrinos which have been building up on the surface of the laser emitter array. Once I determine an efficient way to keep neutrinos out of the arc reaction I have estimated that the final output should yield exactly 1.21 gigawatts of clean usable energy.

No comments:

Post a Comment